ManualB1.1B1.2B1.3
Module 1 Mathematics: B1 / B2 Manual
Module 1 · B1 / B2 · 6 syllabus subjects
- 6 syllabus subjects
- Knowledge levels up to Level 2
US$37.95
Syllabus-aligned (EU) 2023/989 Book or eBook Free preview
Module 7 Maintenance Practices: B1 Aircraft Maintenance Manual
Module 7 · B1 · 27 syllabus subjects
Executive overview
Module 7, Maintenance practices, asks candidates to master workshop safety, tools and measuring equipment, engineering drawings, fits and clearances, riveting, welding, inspection and maintenance documentation. It is pitched at B1 depth, the mechanical and powerplant route to certifying staff privileges, so every chapter of this study manual is selected for B1 candidates and nothing is padded with content outside your category.
The edition maps to 27 syllabus subjects of Regulation (EU) 2023/989, Part-66 Appendix I: 1 at Level 1, 21 at Level 2, 5 at Level 3. That split tells you where to spend your hours, since Level 3 subjects are examined in the greatest depth.
Study it alongside the Quiz Engine: each syllabus reference in this manual is a Quiz Competency, so you can practise one subject at a time, then run a timed simulation of the Module 7 examination. Your Online Senior Instructor uses the same references to send you back to the right chapter.
How it helps you pass the exam
- After the manual you can choose and use the right tool and measuring instrument, read a drawing and apply the stated tolerance and complete maintenance records and follow the inspection flow.
- It confronts the classic stumbling block head on: tolerances, torque practice and documentation requirements.
- Expect a large module with both written theory and practical-knowledge questions; the chapter order follows the syllabus so you can tick subjects off as you go.
Competencies targeted (EASA Part-66 syllabus)
27 syllabus subjects, each shown with the knowledge level examined for the licence scope of this product. Level 1 is familiarisation, Level 2 is general knowledge and Level 3 is detailed knowledge.
Show all 27 subjects
- 7.1Safety precautions — aircraft and workshopL3
- 7.2Workshop practicesL3
- 7.3ToolsL3
- 7.5Engineering drawings, diagrams and standardsL2
- 7.6Fits and clearancesL2
- 7.7Electrical wiring interconnection system (EWIS)L3
- 7.8RivetingL2
- 7.9Pipes and hosesL2
- 7.10SpringsL2
- 7.11BearingsL2
- 7.12TransmissionsL2
- 7.13Control cablesL2
- 7.14.1Material handling — Sheet metalL2
- 7.14.2Material handling — Composite and non-metallicL2
- 7.14.3Material handling — Additive manufacturingL1
- 7.16(a)Aircraft weight and balance — Centre-of-gravity calculationL2
- 7.16(b)Aircraft weight and balance — Aircraft weighingL2
- 7.17Aircraft handling and storageL2
- 7.18(a)Disassembly, inspection, repair and assembly techniques — Types of defects and visual inspection techniquesL3
- 7.18(b)Disassembly, inspection, repair and assembly techniques — General repair methods, structural repair manualL2
- 7.18(c)Disassembly, inspection, repair and assembly techniques — Non-destructive inspection techniquesL2
- 7.18(d)Disassembly, inspection, repair and assembly techniques — Disassembly and reassembly techniquesL2
- 7.18(e)Disassembly, inspection, repair and assembly techniques — Troubleshooting techniquesL2
- 7.19(a)Abnormal events — Inspections following lightning strikes and HIRF penetrationL2
- 7.19(b)Abnormal events — Inspections following abnormal events such as heavy landings and flight through turbulenceL2
- 7.20Maintenance proceduresL2
- 7.21Documentation & communicationL2
Detailed programme
7.1 Safety precautions
- 7.1 aircraft and workshop (Level 3)
7.2 Workshop practices
- 7.2 Workshop practices (Level 3)
7.3 Tools
- 7.3 Tools (Level 3)
7.5 Engineering drawings, diagrams and standards
- 7.5 Engineering drawings, diagrams and standards (Level 2)
7.6 Fits and clearances
- 7.6 Fits and clearances (Level 2)
7.7 Electrical wiring interconnection system (EWIS)
- 7.7 Electrical wiring interconnection system (EWIS) (Level 3)
7.8 Riveting
- 7.8 Riveting (Level 2)
7.9 Pipes and hoses
- 7.9 Pipes and hoses (Level 2)
7.10 Springs
- 7.10 Springs (Level 2)
7.11 Bearings
- 7.11 Bearings (Level 2)
7.12 Transmissions
- 7.12 Transmissions (Level 2)
7.13 Control cables
- 7.13 Control cables (Level 2)
7.14 Material handling
- 7.14.1 Sheet metal (Level 2)
- 7.14.2 Composite and non-metallic (Level 2)
- 7.14.3 Additive manufacturing (Level 1)
7.16 Aircraft weight and balance
- 7.16(a) Centre-of-gravity calculation (Level 2)
- 7.16(b) Aircraft weighing (Level 2)
7.17 Aircraft handling and storage
- 7.17 Aircraft handling and storage (Level 2)
7.18 Disassembly, inspection, repair and assembly techniques
- 7.18(a) Types of defects and visual inspection techniques (Level 3)
- 7.18(b) General repair methods, structural repair manual (Level 2)
- 7.18(c) Non-destructive inspection techniques (Level 2)
- 7.18(d) Disassembly and reassembly techniques (Level 2)
- 7.18(e) Troubleshooting techniques (Level 2)
7.19 Abnormal events
- 7.19(a) Inspections following lightning strikes and HIRF penetration (Level 2)
- 7.19(b) Inspections following abnormal events such as heavy landings and flight through turbulence (Level 2)
7.20 Maintenance procedures
- 7.20 Maintenance procedures (Level 2)
7.21 Documentation & communication
- 7.21 Documentation & communication (Level 2)
Technical specifications and licence eligibility
- Module
- Module 7, Maintenance practices
- Licence scope
- B1.1, B1.2, B1.3, B1.4
- Syllabus subjects
- 27
- Highest knowledge level
- Level 3
- Regulatory basis
- Regulation (EU) 2023/989, Part-66 Appendix I
- Formats
- Book, eBook, Book + eBook bundle
- Printed pages
- 402
- Language
- English
- Delivery
- Confirmed at checkout
Written for B1 candidates in the mechanical and powerplant stream, from first-time examinees to technicians adding a category. This manual supports your study and exam preparation. It does not replace approved Part-147 training or the examination set by your competent authority.
Frequently asked questions
Which licence categories does the Module 7 B1 edition cover?
It follows the Part-66 syllabus columns for B1.1, B1.2, B1.3, B1.4. Subjects that your category does not examine are left out, so you study only what applies to you.
Does this manual replace approved Part-66 training?
No. It is a study and revision resource that mirrors the syllabus. Examinations are sat with your competent authority or an approved Part-147 organisation.
How do I measure progress in Module 7?
Open the Quiz Engine for Module 7: every syllabus reference above has its own competency quiz and the module has a timed exam simulation. Weak results are picked up by your Online Senior Instructor.
Ratings and reviews
No reviews yet. Ratings will come from verified buyers only, so every star you see here is real.
Often studied together
ManualB1.1B1.2B1.3
Module 2 Physics: B1 / B2 Manual
Module 2 · B1 / B2 · 11 syllabus subjects
- 11 syllabus subjects
- Knowledge levels up to Level 2
US$37.95
ManualB1.1B1.2B1.3
Module 4 Electronic Fundamentals: B1 Aircraft Maintenance Manual
Module 4 · B1 · 5 syllabus subjects
- 5 syllabus subjects
- Knowledge levels up to Level 2
US$37.95
ManualB1.1B1.2B1.3
Module 8 Basic Aerodynamics: B1 / B2 Manual
Module 8 · B1 / B2 · 5 syllabus subjects
- 5 syllabus subjects
- Knowledge levels up to Level 2
US$37.95
EASAPART66.EU is an independent learning platform. Study manuals and courses support exam preparation and familiarisation; they do not replace approved Part-147 training, a type-rating course or the examination set by your competent authority. Prices are in US dollars; other currencies are indicative.